Orthodontic Records Helping to Identify A Victim of Execution

ABSTRACT: Human identification is the process that identifies an individual as a unique being, differentiating him/ her from all others. The participation of Odontology in the processes of identification is fundamental in situations of human remains. This paper aims to report a case of positive identification, through dentistry, in human remains. The forensic odontologist performed a post-morten (PM) examination, which consisted of the collection of post-mortem dental findings in human bones, collection of ante-mortem (AM) dental findings in the patient's orthodontic records, and the comparison between AM and PM information. Dental elements are widely used in the processes of human identification, since they are resistant to time and to physical, chemical and mechanical impacts. Positive identification is guided by the presence of individualizing characteristics, easily detected in dental records. It is concluded that human identification through dentistry is a safe and reliable method, since dental elements have individualizing characteristics that make the process possible.

RESUMEN: La identificación humana es el proceso que identifica a un individuo como un ser único, diferenciándolo de todos los demás. La participación de la Odontología en los procesos de identificación es fundamental en situaciones de restos humanos. Este trabajo tiene como objetivo reportar un caso de identificación positiva, a través de la odontología, en restos humanos. El odontólogo forense realizó un examen post-morten (PM), que consistió en la recolección de hallazgos dentales post-mortem en huesos humanos, recolección de hallazgos dentales ante-mortem (AM) en los registros de ortodoncia del paciente y la comparación entre AM y Información de PM. Los elementos dentales son ampliamente utilizados en los procesos de identificación humana, ya que son resistentes al tiempo y a los impactos físicos, químicos y mecánicos. La identificación positiva está guiada por la presencia de características individualizantes, que se detectan fácilmente en los registros dentales. Se concluye que la identificación humana a través de la odontología es un método seguro y confiable, ya que los elementos dentales tienen características individualizantes que hacen posible el proceso.

Radiographic evaluation of dental anomalies in patients with congenital Zika virus syndrome

Abstract: Numerous studies have reported abnormalities in the development of oral structures in congenital infections that also involve microcephaly. In this context, it is necessary to identify possible dental anomalies of shape and/or number in patients with Zika virus syndrome using radiography. The study population consisted of 35 children born with congenital ZIKV who underwent intraoral radiographic examinations for 24 consecutive months. A modified periapical technique was performed in an occlusal position for the maxilla and mandible. Categorical data were expressed as absolute and percentage frequencies and compared using Pearson's Chi-square test, with a 95% confidence interval. Of the entire sample, eight children (22.8%) had dental anomalies of shape and/or number, and four children (11.4%) presented with both anomalies, with agenesis of the upper and lower deciduous/permanent incisors and dental form modifications, such as microdontia and anomalous cusps. When we considered age and sex, there was no statistically significant difference between patients who presented with agenesis and those who presented with modifications. Children with congenital Zika virus syndrome were more likely to have dental modifications in the number and shape of their teeth, and it is essential to implement medium- to long-term monitoring to diagnose other possible alterations throughout the development of the mixed and permanent dentition, favoring their treatment.

Effect of homeopathy in the function and morphology of salivary parotid glands of irradiated rats / Efeito da homeopatia na função e morfologia das glândulas parótidas de ratos irradiados

Objective: To evaluate the radioprotective effect of a homeopathic solution in salivary function and parotid glands morphology of irradiated rats. Materials and Methods: The sample consisted of 150 rats randomly divided into 6 groups. The groups were named based on the substance administered: Control- saline solution; Irradiated Control- saline solution and 15 Gy of X radiation; Alcohol-hydroalcoholic solution dynamized at 15 CH; Irradiated Alcohol- hydroalcoholic solution dynamized at 15 CH and 15 Gy of X radiation; Homeopathy- 0.25 ml (1mL/kg) of the irradiated hydroalcoholic solution and dynamized at 15 CH; Irradiated homeopathy- homeopathic solution and 15 Gy of X radiation. Each group was subdivided into 5 different subgroups, based on the time point of euthanasia: 12 hours, 3, 10, 17, and 24 days. The medication was administered for 7 days before and 7 days after the radiation treatment. On the day of euthanasia, salivation was induced with pilocarpine and collected. The animals were then sacrificed and the parotid glands were removed. Results: Salivary function analysis showed that only group irradiated homeopathy euthanized on day 17 had a statistically significant difference when compared to other irradiated groups, presenting a higher salivation flow rate. The only group that showed a statistically significant difference in the number of acini over time was the irradiated alcohol group, which presented a tendency of reduction. Conclusion: The homeopathic solution presented a late radioprotective effect based on salivary function and morphological analysis of the parotid gland.

Objetivo: Avaliar o efeito radioprotetor de uma solução homeopática na função salivar e na morfologia das glândulas parótidas de ratos irradiados. Materiais e Métodos: A amostra foi composta por 150 ratos divididos aleatoriamente em 6 grupos. Os grupos foram nomeados com base na substância administrada: solução salina controle; Solução salina controle irradiada e 15 Gy de radiação X; Solução álcool-hidroalcoólica dinamizada a 15 CH; Solução hidroalcoólica de álcool irradiado dinamizada a 15 CH e 15 Gy de radiação X; Homeopatia - 0,25 ml (1mL / kg) da solução hidroalcoólica irradiada e dinamizada a 15 CH; Homeopatia irradiada - solução homeopática e 15 Gy de radiação X. Cada grupo foi subdividido em 5 subgrupos diferentes, com base no tempo da eutanásia: 12 horas, 3, 10, 17 e 24 dias. O medicamento foi administrado por 7 dias antes e 7 dias após o tratamento com radiação. No dia da eutanásia, a salivação foi induzida com pilocarpina e coletada. Os animais foram então sacrificados e as glândulas parótidas foram removidas. Resultados: A análise da função salivar mostrou que apenas a homeopatia irradiada por grupo sacrificada no dia 17 apresentou diferença estatisticamente significante quando comparada a outros grupos irradiados, apresentando maior taxa de fluxo de salivação. O único grupo que apresentou diferença estatisticamente significante no número de ácinos ao longo do tempo foi o grupo álcool irradiado, o qual apontou uma tendência de redução. Conclusão: A solução homeopática apresentou efeito radioprotetor tardio baseado na função salivar e na análise morfológica da glândula parótida.

Influência de soluções irrigadoras e de materiais obturadores na infiltração apical ­ análise pelo método de filtração de fluidos / Influence of irrigating solutions and of root filling materials on apical leakage ­ Fluid filtration method analysis

Objetivo: avaliar, por meio do método de filtração de fluidos, a influência da solução irrigadora e diferentes associações de materiais obturadores na infiltração apical. Métodos: foram utilizados 112 pré-molares inferiores extraídos, divididos em dois grupos controle (n=8) e oito grupos experimentais (n=12), de acordo com a solução irrigante: hipoclorito de sódio (H), vinagre de maçã (V), e, de acordo com o material obturador, guta-percha/AH Plus (GA), Resilon/Epiphany (RE), guta-percha/Epiphany (GE) e Resilon/AH Plus (RA). Os canais radiculares foram instrumentados e obturados pela técnica híbrida de Tagger. Em seguida, os canais foram desobturados nos terços médio e cervical, permanecendo apenas 4 mm do terço apical para a análise da infiltração pelo método de filtração de fluidos. Os dados foram analisados, estatisticamente, pelo teste de Kruskal-Wallis, sendo considerado significante quando P<0,05. Resultados: as médias obtidas de infiltração apical (µL/min) nos grupos foram: H/GA (0,03 ± 0,09), V/GA (0,04 ± 0,05), H/RE (0,06 ± 0,13), V/RE (0,10 ± 0,20), H/GE (0,08 ± 0,18), H/GE (0,16 ± 0,21), H/RA (0,40 ± 0,63) e V/RA (0,57 ± 1,13). Não foi observada diferença estatística quanto às soluções de irrigação aplicadas (P>0,05). No entanto, em relação aos materiais obturadores, verificou-se que os grupos obturados com a associação Resilon/AH Plus apresentaram, significativamente, maior infiltração que os demais grupos (P<0,05). Conclusões: a infiltração apical foi influenciada apenas pelos materiais obturadores, independentemente da solução de irrigadora.

Objective: to evaluate by fluid filtration method, the influence of the irrigating solution and different root filling materials associations in the apical leakage. Methods: One hundred-twelve lower premolars extracted were divided in 2 control groups (n=8) and 8 experimental groups (n=12), according to the irrigation solution; sodium hypochlorite (H), apple vinegar (V), and according to the root canal filling material, gutta-percha/AH Plus (GA), Resilon/Epiphany (RE), gutta-percha/Epiphany (GE), Resilon/AH Plus (RA). The roots canals were instrumented and filled by Tagger's hybrid technique being removed from the filling material, having remained only 4 mm of apical root third to analyze the leakage through fluid filtration method. Data were analyzed by Kruskal-Wallis test and P<0.05 was considered significant. Results: The apical leakage means (µL/min) observed in the groups were, H/GA (0.03 ± 0.09), V/GA (0.04 ± 0.05), H/RE (0.06 ± 0.13), V/RE (0.10 ± 0.20), H/GE (0.08 ± 0.18), H/GE (0.16 ± 0.21), H/RA (0.40 ± 0.63) e V/RA (0.57 ± 1.13). It was observed no statistical difference regarding the irrigation solutions applied (P>0.05), although the groups irrigated with sodium hypochlorite showed the best results. However, regarding the root canal filling material used, it was verified that the groups filled with Resilon/AH Plus association (H/RA e V/RA) have shown leakage higher significantly than other groups (P<0.05). Conclusion The apical leakage was influenced only by the root filling materials, regardless the irrigation solution.

Internal configuration of maxillary molars in a subpopulation of Brazil's Northeast region: A CBCT analysis

Abstract The present study aimed to evaluate the internal configuration of the maxillary molars of a population from the Northeast region of Brazil. Cone-beam computed tomography (CBCT) exams from 512 patients (1501 teeth) were evaluated regarding the anatomical configuration of the root canal system, according to Vertucci's classification. The images were obtained using a Prexion 3D scanner operating at 90 kVp and 4 mA. The voxel size was 0.125 mm and the cut thickness was 1 mm. The images were then analyzed in the Prexion 3D Viewer software. The data were analyzed statistically by Pearson's chi-square test, with 5% of significance. The first and second molars presented three roots in 99.14% and 87.27% of the cases, respectively. In relation to the number of canals, the first and second molars had a significantly higher frequency of three and four root canals respectively, presenting a higher prevalence of types I and II (p < 0.001). The second mesiobuccal canal (MB2) was observed in 48.21% and 22.72% of the first and second molars, respectively (p < 0.001). The identification of the MB2 canal was greater in young and adult patients (p < 0.001), presenting a higher prevalence in male patients (p < 0.001). The internal configuration of the MB root was influenced by gender and by age, presenting a higher prevalence of the MB2 in male patients younger than 50 years of age.

Clinical and x-ray oral evaluation in patients with congenital Zika Virus

Abstract Objective: The aim of this study was to investigate possible malformations in the soft, bone and/or dental tissues in patients with congenital Zika Virus (ZIKV) by clinical and x-ray evaluation. Methodology: Thirty children born with ZIKV and 30 children born without ZIKV (control group) were included in the study. Patients were evaluated over 24 consecutive months according to the variables: sex, age, cleft palates, soft tissue lesions, alveolar ridge hyperplasia, short labial and lingual frenums, inadequate posture of the lingual and perioral muscles at rest, micrognathia, narrow palatine vaults, changes in the teeth shape and/or number, sequence eruption, spasms, seizures and eruption delay were evaluated. Chi-square test, Student's t-test and nominal logistic regression were used (p<0.05). Results: Among the 30 babies examined, the mean age of the first dental eruption was 10.8±3.8 with almost two-thirds of the children (n=18, 60%) experiencing eruptions of their first tooth after 9 months of age, nine children (30%) had inadequate lingual posture at rest, more than half of the children (n=18, 60%) had short labial or lingual frenums. ZIKV babies showed a high prevalence of clef palate (p<0.001), inadequate lingual posture at rest (p=0.004), micrognathia (p=0.002), changes in the shape and/or number of teeth (p=0.006), alteration in sequence of dental eruption (p<0.001) and muscles spasms (p=0.002). The delay eruption was associated with inadequate lingual posture at rest (p=0.047), micrognathia (p=0.002) and changes in the shape and/or number of teeth (p=0.021). The delayed eruption (p=0.006) and narrow palatine vaults (p=0.008) were independently associated with ZIKV. Moreover, female patients showed the most narrow palatine vaults (p=0.010). Conclusions: The children with ZIKV showed a greater tendency to have delayed eruption of the first deciduous tooth, inadequate lingual posture and short labial and lingual frenums.

Comparison of palatal bone height in different facial morphological patterns by cone beam computed tomography

Abstract Aim: To evaluate the relationship between palatal bone height and facial types using cone beam computed tomography (CBCT) images. Methods: The study sample consisted of 110 CBCT images. Subjects aged 18 to 35 years old were classified as brachyfacial, mesofacial and dolichofacial, according to SN.GoGn angle, measured in cephalometric analysis with Nemotec 3D software. Three observers evaluated the bone height of the palate in the anterior region, at the level of the maxillary first premolars. The measurements were performed in sagittal and coronal views, in median and paramedian regions of the palate, also using Nemotec 3D software. Measurements were repeated after 15 days on 25% of the sample to analyse intra and interobserver agreements by CCI test. Analysis of variance was performed to calculate statistical differences between the bone heights of the three facial types, with a significance level of 5%. Results: The correlation level of intra-observer agreement was excellent. No significant differences were observed between the palatal bone height in the region of first premolars and the different facial types (p>0.05). Conclusions: Based on CBCT evaluations, there is no association between palatal bone height and facial morphological patterns.

Utilización del prototipado rápido en la odontología / The use of rapid prototyping in dentistry

Nuevas técnicas van acompañando la evolución de la odontología y buscan superar obstáculos presentes en la actualidad. El prototipado rápido (PR) fue insertado en el medio odontológico con el propósito de auxiliar procedimientos, minimizar riesgos y disminuir el tiempo quirúrgico. A partir de exámenes tomográficos y de resonancia magnética, son creados diseños asistidos por medio de un computador específico, luego de ello son transformados en un lenguaje propio, para que a partir de ahí, estos diseños sean transformados en objetos físicos en 3 dimensiones (prototipos), fieles al modelo inicial hecho en la computadora. Existen muchas técnicas para la confección de los modelos 3D, variando el tipo de material que se añadirá, por el proceso de adición en capas. Muchas son las áreas beneficiadas por el PR; sin embargo, cirugia, implantología, prótesis y ortodoncia, asimilaron más los principios de esta técnica la cual está ayudando de manera significativa en su práctica diaria. Los beneficios del PR son numerosos, sea en la disminución de riesgos quirúrgicos, precisión de maniobras, disminución de tiempo transoperatorio, estética en los procedimientos y hasta en la comunicación entre el cirujano dentista y el paciente. Las desventajas de la técnica incluyen el elevado costo inicial y un considerable tiempo de preparación del prototipado. Lo que se viene observando es que el PR se está convirtiendo cada vez más de uso cotidiano odontológico y sus beneficios superan algunas desventajas aún persistentes...

New techniques have been accompanying the development of dentistry and seek to overcome obstacles present nowadays. The Rapid Prototyping (RP) was inserted into the dentistry in order to assist procedures, minimize risk and reduce the surgical time. From Computed Tomography exams and Magnetic Resonance, are been created design assisted by a specific computer, then processed in its own language; so from there, such designs are transformed into physical objects in 3 dimensions (prototype), trusted in the initial model created in the computer. There are many techniques for production of 3D models, varying the type of material that will be added by the process of adding layers. Many areas were benefited by the PR, however Surgery, Implantology, Orthodontics and Prosthodontics, absorbed the principles of this technique which is helping significantly in their daily practice. The benefits of PR are undisputed, whether in the reduction of surgical risks, precision maneuvers, and gain time in the trans-operative period, cosmetic procedures and in the communication between the dentist and the patient. The disadvantages of the technique are also reported as high initial cost and considerable time preparing the prototype. What has been observed is that this PR is becoming increasingly present in the dental practice and the benefits are overcoming some disadvantages still persistent...